EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · CITGO

CITGO Citgard 700 Synthetic Blend 10W-30

CITGO Citgard 700 Synthetic Blend 10W-30 is a 10W-30 engine oil (API CK-4, CJ-4, CI-4). According to the manufacturer's data sheet it has a viscosity of 80.9 mm²/s at 40 °C, 11.9 mm²/s at 100 °C, a viscosity index of 142, a TBN of 10 mg KOH/g, a pour point of −39 °C and sulphated ash of 1 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °C80.9 mm²/s67.6 mm²/s
Viscosity 100 °C11.9 mm²/s10.9 mm²/s
Viscosity index142 148
TBN10 mg KOH/g9.3 mg KOH/g
CCS −25 °C6159 mPa·s5000 mPa·s
Pour point−39 °C−39 °C
Flash point224 °C226 °C
Density0.87 g/cm³0.865 g/cm³
HTHS 150 °Cnot stated
Sulphated ash1 %0.995 %
Noack volatility12 %

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API CK-4, CJ-4, CI-4
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

CITGO Citgard 700 Synthetic Blend 10W-30 is a motor oil from CITGO, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.

The oil meets API CK-4, API CJ-4, API CI-4, Cummins CES 20086 and more (13 in total). API CK-4 is the current American specification for truck and pickup diesel engines. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 11.9 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Average values: TBN 10 mg KOH/g is close to the class middle (median 9.3); pour point −39 °C is close to the class middle (median −39).

Weaker values: viscosity index 142 is among the weakest in the class (median 148); CCS 6159 mPa·s is in the weaker half of the class (median 4783); flash point 224 °C is in the weaker half of the class (median 227); Noack volatility 12 % is among the weakest in the class (median 8).

Limit values: CCS 6159 mPa·s at −25 °C is 88 % of the SAE limit (7000 mPa·s); sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, so we cannot compare it on this parameter.