Royal Purple Duralec Super 10W-30
Royal Purple Duralec Super 10W-30 is a 10W-30 engine oil (ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 81.9 mm²/s at 40 °C, 12.1 mm²/s at 100 °C, a viscosity index of 144, a TBN of 9.3 mg KOH/g, a pour point of −45 °C and sulphated ash of 0.99 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-30 i |
|---|---|---|
| Viscosity 40 °C | 81.9 mm²/s | 67.6 mm²/s |
| Viscosity 100 °C | 12.1 mm²/s | 10.9 mm²/s |
| Viscosity index | 144 | 148 |
| TBN | 9.3 mg KOH/g | 9.3 mg KOH/g |
| CCS −25 °C | 6087 mPa·s | 5000 mPa·s |
| Pour point | −45 °C | −39 °C |
| Flash point | 223 °C | 226 °C |
| Density | not stated | |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA E7 requires at least 3.5 mPa·s. | |
| Sulphated ash | 0.99 % | 0.995 % |
All 10W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Oils by specification
Similar oils
Oils in the 10W-30 class with the closest parameters and the same specification.
- Valvoline Premium Blue 8600 ES 10W-30ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Royal Purple Duralec Ultra 10W-30ACEA E7, E9 · API CK-4 · JASO DH-2
- CITGO Citgard 700 Synthetic Blend 10W-30API CK-4, CJ-4, CI-4
- Valvoline VR1 Racing 10W-30
- Castrol GTX High Mileage 10W-30API SQ · ILSAC GF-7
- Havoline ProDS Full Synthetic 10W-30API SN
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.
Royal Purple Duralec Super 10W-30 is a motor oil from Royal Purple, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.
The oil meets API CK-4, API CJ-4, API CI-4, ACEA E7 and more (16 in total). API CK-4 is the current American specification for truck and pickup diesel engines. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 12.1 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: pour point −45 °C is in the top quarter of the class (median −39).
Average values: TBN 9.3 mg KOH/g is close to the class middle (median 9.3).
Weaker values: viscosity index 144 is in the weaker half of the class (median 148); CCS 6087 mPa·s is in the weaker half of the class (median 4783); flash point 223 °C is in the weaker half of the class (median 227).
Limit values: CCS 6087 mPa·s at −25 °C is 87 % of the SAE limit (7000 mPa·s); sulphated ash of 0.99 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.
Based on its values it suits truck and pickup diesel engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.