EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Schaeffer

Schaeffer Supreme 9000 Full Synthetic 5W-40

Schaeffer Supreme 9000 Full Synthetic 5W-40 is a 5W-40 engine oil (ACEA E7, E9 · API CJ-4, CI-4, SN · JASO DH-2). According to the manufacturer's data sheet it has a viscosity index of 164, HTHS of 4.05 mPa·s, a TBN of 9 mg KOH/g and sulphated ash of 0.98 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-40 i
Viscosity 40 °Cnot stated
Viscosity 100 °Cnot statedThe manufacturer gives viscosity at 40 and 100 °C only as a range (85.5–89 and 13.5–15 mm²/s), so it is not in the table.
Viscosity index164 168.5
TBN9 mg KOH/g10.15 mg KOH/g
CCS −30 °C5700 mPa·s6300 mPa·s
Pour point−42 °CThe manufacturer gives only a limit, "less than −42", not a measured value.−45 °C
Flash point225 °C225 °C
Densitynot stated
HTHS 150 °C4.05 mPa·s3.8 mPa·s
Sulphated ash0.98 %1 %
Noack volatility11 %

All 5W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7, E9 · API CJ-4, CI-4, SN · JASO DH-2
Oils by specification

Similar oils

Oils in the 5W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-40 class.

Schaeffer Supreme 9000 Full Synthetic 5W-40 is a motor oil from Schaeffer, viscosity grade 5W-40. In the database we compare it with 8 other oils in the 5W-40 class.

The oil meets API CJ-4, API CI-4, API SN, ACEA E7 and more (16 in total). API SN is an older American specification for petrol engines. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF.

Strengths: CCS 5700 mPa·s is in the top quarter of the class (median 6300).

Average values: HTHS 4 mPa·s is close to the class middle (median 3.8).

Weaker values: viscosity index 164 is among the weakest in the class (median 168); flash point 225 °C is in the weaker half of the class (median 232).

Limit values: HTHS 4 mPa·s meets the 3.5 mPa·s minimum required for this class; CCS 5700 mPa·s at −30 °C is 86 % of the SAE limit (6600 mPa·s); sulphated ash of 0.98 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF. The specification or approval in your vehicle manual always has the final word.