Castrol EDGE High Mileage 0W-20
Castrol EDGE High Mileage 0W-20 is a 0W-20 engine oil (API SQ · ILSAC GF-7). According to the manufacturer's data sheet it has a viscosity of 44 mm²/s at 40 °C, 8.8 mm²/s at 100 °C, a viscosity index of 169, a pour point of −39 °C and sulphated ash of 0.78 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 44 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.8 mm²/s | 8.4 mm²/s |
| Viscosity index | 169 | 169 |
| TBN | not stated | |
| CCS −35 °C | 6033 mPa·s | 5670 mPa·s |
| Pour point | −39 °C | −42.5 °C |
| Flash point | 225 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 225 °C |
| Density | 0.853 g/cm³ | 0.845 g/cm³ |
| HTHS 150 °C | not stated | |
| Sulphated ash | 0.78 % | 0.79 % |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SQ · ILSAC GF-7
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- Pennzoil Ultra Platinum 0W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Castrol EDGE 0W-20 (US)API SQ · ILSAC GF-7
- Pennzoil Platinum 0W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- Motorcraft 0W-20 Full SyntheticAPI SQ · ILSAC GF-7A
- Motorcraft 0W-20 Synthetic BlendAPI SN · ILSAC GF-5
- Pennzoil Platinum High Mileage 0W-20API SP · ILSAC GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
Castrol EDGE High Mileage 0W-20 is a motor oil from Castrol, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SQ, ILSAC GF-7, Chrysler MS-6395, Ford WSS-M2C947-A and more (6 in total). API SQ is the latest American specification for petrol engines, introduced in 2025. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 8.8 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 169 is close to the class middle (median 169).
Weaker values: CCS 6033 mPa·s is among the weakest in the class (median 5670); pour point −39 °C is among the weakest in the class (median −44).
Limit values: CCS 6033 mPa·s at −35 °C is 97 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve; sulphated ash of 0.78 % is suitable for engines with a DPF.
Based on its values it suits engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.