EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Pennzoil

Pennzoil Ultra Platinum 0W-40

Pennzoil Ultra Platinum 0W-40 is a 0W-40 engine oil (API SN). According to the manufacturer's data sheet it has a viscosity of 74.9 mm²/s at 40 °C, 13.7 mm²/s at 100 °C, a viscosity index of 189 and a pour point of −51 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-40 i
Viscosity 40 °C74.9 mm²/s75.45 mm²/s
Viscosity 100 °C13.7 mm²/s13.4 mm²/s
Viscosity index189 186.5
TBNnot stated
CCS −35 °Cnot stated
Pour point−51 °C−49 °C
Flash point224 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.225 °C
Density0.841 g/cm³0.841 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated
Noack volatility13 %

All 0W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SN
Oils by specification

Similar oils

Oils in the 0W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-40 class.

Pennzoil Ultra Platinum 0W-40 is a motor oil from Pennzoil, viscosity grade 0W-40. In the database we compare it with 7 other oils in the 0W-40 class.

The oil meets API SN. API SN is an older American specification for petrol engines.

Viscosity at 100 °C is 13.7 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Average values: viscosity index 189 is close to the class middle (median 186); pour point −51 °C is close to the class middle (median −50).

The data sheet does not state HTHS, TBN and sulphated ash, so we cannot compare it on these parameters.