Royal Purple High Performance European Formula 0W-40
Royal Purple High Performance European Formula 0W-40 is a 0W-40 engine oil (0W-40). According to the manufacturer's data sheet it has a viscosity of 64.4 mm²/s at 40 °C, 12.9 mm²/s at 100 °C, a viscosity index of 205, HTHS of 3.6 mPa·s and a pour point of −48 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-40 i |
|---|---|---|
| Viscosity 40 °C | 64.4 mm²/s | 75.45 mm²/s |
| Viscosity 100 °C | 12.9 mm²/s | 13.4 mm²/s |
| Viscosity index | 205 | 186.5 |
| TBN | not stated | |
| CCS −35 °C | 5997 mPa·s | 5970 mPa·s |
| Pour point | −48 °C | −49 °C |
| Flash point | 219 °C | 225 °C |
| Density | 0.848 g/cm³ | 0.841 g/cm³ |
| HTHS 150 °C | 3.6 mPa·s | 3.7 mPa·s |
| Sulphated ash | not stated |
All 0W-40 oils → See the class table for a detailed comparison with other oils.
Similar oils
Oils in the 0W-40 class with the closest parameters and the same specification.
- Mobil 1 Supercar 0W-40
- Valvoline Advanced Full Synthetic XL-III 0W-40ACEA A3/B3, A3/B4 · API SN
- Amsoil Signature Series 0W-40API SQ, SP, SN Plus
- Red Line 0W-40ACEA A3/B3, A3/B4 · API SN
- Pennzoil Platinum Euro 0W-40ACEA A3/B3, A3/B4 · API SP
- Castrol EDGE 0W-40 A3/B4 (US)ACEA A3/B4 · API SP
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-40 class.
Royal Purple High Performance European Formula 0W-40 is a motor oil from Royal Purple, viscosity grade 0W-40. In the database we compare it with 7 other oils in the 0W-40 class.
The data sheet lists no specifications or carmaker approvals, so it only suits engines whose manual does not require a specific approval.
Viscosity at 100 °C is 12.9 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.
Strengths: viscosity index 205 is among the best 10 % in the class (median 186).
Weaker values: HTHS 3.6 mPa·s is in the weaker half of the class (median 3.7); pour point −48 °C is in the weaker half of the class (median −50).
Limit values: HTHS 3.6 mPa·s meets the 3.5 mPa·s minimum required for this class; CCS 5997 mPa·s at −35 °C is 97 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve.
Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state TBN, Noack volatility and sulphated ash, so we cannot compare it on these parameters.