EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Pennzoil

Pennzoil Platinum Euro 0W-40

Pennzoil Platinum Euro 0W-40 is a 0W-40 engine oil (ACEA A3/B3, A3/B4 · API SP). According to the manufacturer's data sheet it has a viscosity of 72.2 mm²/s at 40 °C, 13 mm²/s at 100 °C, a viscosity index of 183 and a pour point of −48 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-40 i
Viscosity 40 °C72.2 mm²/s75.45 mm²/s
Viscosity 100 °C13 mm²/s13.4 mm²/s
Viscosity index183 186.5
TBNnot stated
CCS −35 °C5960 mPa·s5970 mPa·s
Pour point−48 °C−49 °C
Flash point232 °C225 °C
Density0.834 g/cm³0.841 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A3/B3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B3 allows at most 1.5 %.

All 0W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B3, A3/B4 · API SP
Oils by specification

Similar oils

Oils in the 0W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-40 class.

Pennzoil Platinum Euro 0W-40 is a motor oil from Pennzoil, viscosity grade 0W-40. In the database we compare it with 7 other oils in the 0W-40 class.

The oil meets API SP, ACEA A3/B3, ACEA A3/B4, MB 229.3 and more (10 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. MB 229.5 is the Mercedes-Benz approval for engines without a DPF with extended intervals. Renault RN0700 and RN0710 are Renault/Dacia approvals for petrol and older diesel engines.

Viscosity at 100 °C is 13 mm²/s, near the lower end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thin side, which helps fuel economy.

Weaker values: viscosity index 183 is in the weaker half of the class (median 186); pour point −48 °C is in the weaker half of the class (median −50).

Limit values: CCS 5960 mPa·s at −35 °C is 96 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve.

Based on its values it suits everyday driving where fuel economy matters most. The specification or approval in your vehicle manual always has the final word.