EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Quaker State

Quaker State Euro L Full Synthetic 5W-30

Quaker State Euro L Full Synthetic 5W-30 is a 5W-30 engine oil (ACEA C3 · API SN). According to the manufacturer's data sheet it has a viscosity of 70.2 mm²/s at 40 °C, 13 mm²/s at 100 °C, a viscosity index of 189 and a pour point of −45 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C70.2 mm²/s61.2 mm²/s
Viscosity 100 °C13 mm²/s10.7 mm²/s
Viscosity index189 166
TBNnot stated
CCS −30 °Cnot stated
Pour point−45 °C−42 °C
Flash point242 °C230 °C
Density0.849 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA C3 requires at least 3.5 mPa·s.
Sulphated ashnot statedNot stated by the manufacturer. ACEA C3 allows at most 0.8 %.

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA C3 · API SN
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Quaker State Euro L Full Synthetic 5W-30 is a motor oil from Quaker State, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SN, ACEA C3, BMW LL-04, MB 229.31 and more (6 in total). API SN is an older American specification for petrol engines. ACEA C3 means a mid-SAPS oil (max 0.8 % ash) with HTHS of at least 3.5 mPa·s for petrol and diesel engines with a particulate filter. MB 229.51 is the Mercedes-Benz approval for engines with a DPF.

Viscosity at 100 °C is 13 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 189 is among the best 10 % in the class (median 166); pour point −45 °C is in the top quarter of the class (median −42); flash point 242 °C is in the top quarter of the class (median 232).

Based on its values it suits higher loads, towing or high-mileage engines. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.