EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Castrol

Castrol EDGE 5W-30 A3/B4 (US)

Castrol EDGE 5W-30 A3/B4 (US) is a 5W-30 engine oil (ACEA A3/B3, A3/B4 · API SL). According to the manufacturer's data sheet it has a viscosity of 72 mm²/s at 40 °C, 12.1 mm²/s at 100 °C, a viscosity index of 165, a pour point of −36 °C and sulphated ash of 1.21 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 5W-30 i
Viscosity 40 °C72 mm²/s61.2 mm²/s
Viscosity 100 °C12.1 mm²/s10.7 mm²/s
Viscosity index165 166
TBNnot stated
CCS −30 °C6580 mPa·s4965 mPa·s
Pour point−36 °C−42 °C
Flash point210 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows.230 °C
Density0.853 g/cm³0.851 g/cm³
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA A3/B3 requires at least 3.5 mPa·s.
Sulphated ash1.21 %0.87 %

All 5W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B3, A3/B4 · API SL
Oils by specification

Similar oils

Oils in the 5W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.

Castrol EDGE 5W-30 A3/B4 (US) is a motor oil from Castrol, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.

The oil meets API SL, ACEA A3/B3, ACEA A3/B4, BMW LL-01 and more (7 in total). ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. MB 229.5 is the Mercedes-Benz approval for engines without a DPF with extended intervals.

Viscosity at 100 °C is 12.1 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Weaker values: viscosity index 165 is in the weaker half of the class (median 166); CCS 6580 mPa·s is among the weakest in the class (median 4900); pour point −36 °C is among the weakest in the class (median −42).

Limit values: CCS 6580 mPa·s at −30 °C is 100 % of the SAE limit (6600 mPa·s), leaving little cold-start reserve; sulphated ash of 1.21 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.