Castrol EDGE Extended Performance 0W-20
Castrol EDGE Extended Performance 0W-20 is a 0W-20 engine oil (ACEA C5, C6 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 44 mm²/s at 40 °C, 8.2 mm²/s at 100 °C, a viscosity index of 166, a pour point of −42 °C and sulphated ash of 0.78 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 0W-20 i |
|---|---|---|
| Viscosity 40 °C | 44 mm²/s | 44.145 mm²/s |
| Viscosity 100 °C | 8.2 mm²/s | 8.4 mm²/s |
| Viscosity index | 166 | 169 |
| TBN | not stated | |
| CCS −35 °C | 5800 mPa·s | 5670 mPa·s |
| Pour point | −42 °C | −42.5 °C |
| Flash point | 203 °CMeasured in a closed cup (PMCC), so lower than the COC values in the other rows. | 225 °C |
| Density | 0.843 g/cm³ | 0.845 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA C5 requires 2.6 to less than 2.9 mPa·s. | |
| Sulphated ash | 0.78 % | 0.79 % |
All 0W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA C5, C6 · API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 0W-20 class with the closest parameters and the same specification.
- Performance Plus Full Synthetic dexos1 Gen3 0W-20API SP · ILSAC GF-6A
- Castrol GTX Ultraclean 0W-20API SQ · ILSAC GF-7
- THRIVE dexos1 Gen3 Full Synthetic 0W-20API SP · ILSAC GF-6A
- Quaker State Full Synthetic 0W-20API SP · ILSAC GF-6A
- Havoline ProDS Full Synthetic 0W-20API SN
- Pennzoil Platinum High Mileage 0W-20API SP · ILSAC GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.
Castrol EDGE Extended Performance 0W-20 is a motor oil from Castrol, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.
The oil meets API SP, ILSAC GF-6A, ACEA C5, ACEA C6 and more (8 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. ACEA C5 is a fuel-economy specification with low HTHS (2.6–2.9 mPa·s) for newer DPF engines. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 8.2 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Weaker values: viscosity index 166 is in the weaker half of the class (median 169); CCS 5800 mPa·s is in the weaker half of the class (median 5670); pour point −42 °C is in the weaker half of the class (median −44).
Limit values: CCS 5800 mPa·s at −35 °C is 94 % of the SAE limit (6200 mPa·s), leaving little cold-start reserve; sulphated ash of 0.78 % is suitable for engines with a DPF.
Based on its values it suits engines with a DPF. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, TBN and Noack volatility, so we cannot compare it on these parameters.