EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Red Line

Red Line 15W-40

Red Line 15W-40 is a 15W-40 engine oil (ACEA E9 · API CJ-4, CI-4, SN). According to the manufacturer's data sheet it has a viscosity of 97 mm²/s at 40 °C, 14.5 mm²/s at 100 °C, a viscosity index of 155, HTHS of 4.7 mPa·s and a pour point of −45 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C97 mm²/s114.44 mm²/s
Viscosity 100 °C14.5 mm²/s15.2 mm²/s
Viscosity index155 138
TBNnot stated
CCS −20 °C6500 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s).6200 mPa·s
Pour point−45 °C−37 °C
Flash point236 °C230 °C
Densitynot stated
HTHS 150 °C4.7 mPa·s4.26 mPa·s
Sulphated ashnot statedNot stated by the manufacturer. ACEA E9 allows at most 1 %.
Noack volatility6 %

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E9 · API CJ-4, CI-4, SN
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

Red Line 15W-40 is a motor oil from Red Line, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.

The oil meets API CJ-4, API CI-4, API SN, ACEA E9. API SN is an older American specification for petrol engines. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF.

Viscosity at 100 °C is 14.5 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.

Strengths: viscosity index 155 is among the best 10 % in the class (median 138); HTHS 4.7 mPa·s is among the best 10 % in the class (median 4.3); pour point −45 °C is among the best 10 % in the class (median −37); Noack volatility 6 % is among the best 10 % in the class (median 11).

Average values: flash point 236 °C is close to the class middle (median 232).

Limit values: HTHS 4.7 mPa·s meets the 3.7 mPa·s minimum required for this class.

The data sheet does not state TBN and sulphated ash, so we cannot compare it on these parameters.