EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Phillips 66

Phillips 66 Guardol ECT 15W-40

Phillips 66 Guardol ECT 15W-40 is a 15W-40 engine oil (ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 119 mm²/s at 40 °C, 15.4 mm²/s at 100 °C, a viscosity index of 135, HTHS of 4.26 mPa·s, a TBN of 10.5 mg KOH/g, a pour point of −40 °C and sulphated ash of 1 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C119 mm²/s114.44 mm²/s
Viscosity 100 °C15.4 mm²/s15.2 mm²/s
Viscosity index135 138
TBN10.5 mg KOH/g10.05 mg KOH/g
CCS −20 °C6200 mPa·s6200 mPa·s
Pour point−40 °C−37 °C
Flash point240 °C230 °C
Density0.875 g/cm³0.875 g/cm³
HTHS 150 °C4.26 mPa·s4.26 mPa·s
Sulphated ash1 %1 %

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

Phillips 66 Guardol ECT 15W-40 is a motor oil from Phillips 66, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.

The oil meets API CK-4, API CJ-4, API CI-4, ACEA E9 and more (14 in total). API CK-4 is the current American specification for truck and pickup diesel engines. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups.

Viscosity at 100 °C is 15.4 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: flash point 240 °C is in the top quarter of the class (median 232).

Average values: HTHS 4.3 mPa·s is close to the class middle (median 4.3); TBN 10.5 mg KOH/g is close to the class middle (median 10.1); pour point −40 °C is close to the class middle (median −37).

Weaker values: viscosity index 135 is in the weaker half of the class (median 138); CCS 6200 mPa·s is in the weaker half of the class (median 6050).

Limit values: HTHS 4.3 mPa·s meets the 3.7 mPa·s minimum required for this class; CCS 6200 mPa·s at −20 °C is 89 % of the SAE limit (7000 mPa·s); sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF and higher loads, towing or high-mileage engines. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.