Shell Rotella T4 Triple Protection 15W-40
Shell Rotella T4 Triple Protection 15W-40 is a 15W-40 engine oil (ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2, MA, MA2). According to the manufacturer's data sheet it has a viscosity of 118 mm²/s at 40 °C, 15 mm²/s at 100 °C, a viscosity index of 133, a TBN of 10.1 mg KOH/g, a pour point of −36 °C and sulphated ash of 1 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 15W-40 i |
|---|---|---|
| Viscosity 40 °C | 118 mm²/s | 114.44 mm²/s |
| Viscosity 100 °C | 15 mm²/s | 15.2 mm²/s |
| Viscosity index | 133 | 138 |
| TBN | 10.1 mg KOH/g | 10.05 mg KOH/g |
| CCS −20 °C | not stated | |
| Pour point | −36 °C | −37 °C |
| Flash point | 234 °C | 230 °C |
| Density | 0.878 g/cm³ | 0.875 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA E9 requires at least 3.5 mPa·s. | |
| Sulphated ash | 1 % | 1 % |
All 15W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2, MA, MA2
- Oils by specification
Similar oils
Oils in the 15W-40 class with the closest parameters and the same specification.
- Shell Rotella T3 Fleet 15W-40ACEA E9 · API CK-4, CJ-4, CI-4, SN · JASO DH-2
- Kendall Super-D XA 15W-40ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Chevron Delo 400 SDE 15W-40ACEA E9 · API CK-4, CJ-4, CI-4
- Phillips 66 Guardol ECT 15W-40ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Red Line 15W-40ACEA E9 · API CJ-4, CI-4, SN
- Shell Rotella T5 15W-40API CK-4, CJ-4
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.
Shell Rotella T4 Triple Protection 15W-40 is a motor oil from Shell, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.
The oil meets API CK-4, API CJ-4, API CI-4, ACEA E9 and more (21 in total). API CK-4 is the current American specification for truck and pickup diesel engines. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. JASO MA2 means the oil is also suitable for motorcycles with a wet clutch. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 15 mm²/s, in the middle of the 12.5–16.3 mm²/s range for the summer grade 40.
Average values: TBN 10.1 mg KOH/g is close to the class middle (median 10.1); pour point −36 °C is close to the class middle (median −37); flash point 234 °C is close to the class middle (median 232).
Weaker values: viscosity index 133 is among the weakest in the class (median 138).
Limit values: sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.
Based on its values it suits truck and pickup diesel engines with a DPF. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.