Shell Rotella T3 Fleet 15W-40
Shell Rotella T3 Fleet 15W-40 is a 15W-40 engine oil (ACEA E9 · API CK-4, CJ-4, CI-4, SN · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 115 mm²/s at 40 °C, 15.3 mm²/s at 100 °C, a viscosity index of 139, a TBN of 10 mg KOH/g and a pour point of −35 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 15W-40 i |
|---|---|---|
| Viscosity 40 °C | 115 mm²/s | 114.44 mm²/s |
| Viscosity 100 °C | 15.3 mm²/s | 15.2 mm²/s |
| Viscosity index | 139 | 138 |
| TBN | 10 mg KOH/g | 10.05 mg KOH/g |
| CCS −20 °C | 6200 mPa·s | 6200 mPa·s |
| Pour point | −35 °C | −37 °C |
| Flash point | 236 °C | 230 °C |
| Density | 0.876 g/cm³ | 0.875 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA E9 requires at least 3.5 mPa·s. | |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA E9 allows at most 1 %. |
All 15W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA E9 · API CK-4, CJ-4, CI-4, SN · JASO DH-2
- Oils by specification
Similar oils
Oils in the 15W-40 class with the closest parameters and the same specification.
- Kendall Super-D XA 15W-40ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Shell Rotella T4 Triple Protection 15W-40ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2, MA, MA2
- Phillips 66 Guardol ECT 15W-40ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Chevron Delo 400 SDE 15W-40ACEA E9 · API CK-4, CJ-4, CI-4
- Red Line 15W-40ACEA E9 · API CJ-4, CI-4, SN
- Royal Purple Duralec Super 15W-40ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.
Shell Rotella T3 Fleet 15W-40 is a motor oil from Shell, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.
The oil meets API CK-4, API CJ-4, API CI-4, API SN and more (22 in total). API CK-4 is the current American specification for truck and pickup diesel engines. API SN is an older American specification for petrol engines. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 15.3 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.
Average values: viscosity index 139 is close to the class middle (median 138); flash point 236 °C is close to the class middle (median 232).
Weaker values: TBN 10 mg KOH/g is in the weaker half of the class (median 10.1); CCS 6200 mPa·s is in the weaker half of the class (median 6050); pour point −35 °C is in the weaker half of the class (median −37).
Limit values: CCS 6200 mPa·s at −20 °C is 89 % of the SAE limit (7000 mPa·s).
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS, Noack volatility and sulphated ash, so we cannot compare it on these parameters.