Red Line 5W-20
Red Line 5W-20 is a 5W-20 engine oil (ACEA A5/B5 · API SN). According to the manufacturer's data sheet it has a viscosity of 53 mm²/s at 40 °C, 9 mm²/s at 100 °C, a viscosity index of 147, HTHS of 3 mPa·s and a pour point of −45 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-20 i |
|---|---|---|
| Viscosity 40 °C | 53 mm²/s | 47.75 mm²/s |
| Viscosity 100 °C | 9 mm²/s | 8.4 mm²/s |
| Viscosity index | 147 | 157.5 |
| TBN | not stated | |
| CCS −30 °C | 6000 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s). | 4397 mPa·s |
| Pour point | −45 °C | −42 °C |
| Flash point | 232 °C | 225 °C |
| Density | not stated | |
| HTHS 150 °C | 3 mPa·s | 2.7 mPa·s |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A5/B5 allows at most 1.6 %. | |
| Noack volatility | 8 % |
All 5W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A5/B5 · API SN
- Oils by specification
Similar oils
Oils in the 5W-20 class with the closest parameters and the same specification.
- Amsoil Signature Series 5W-20API SQ, SP, SN Plus · ILSAC GF-7A, GF-6A, GF-5
- AMSOIL XL 5W-20ACEA A1/B1 · API SP · ILSAC GF-6A
- AMSOIL OE 5W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Royal Purple HPS 5W-20
- Kendall GT-1 Endurance 5W-20API SN · ILSAC GF-5
- Kendall GT-1 Full Synthetic 5W-20API SN · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.
Red Line 5W-20 is a motor oil from Red Line, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.
The oil meets API SN, ACEA A5/B5. API SN is an older American specification for petrol engines. ACEA A5/B5 is a fuel-economy specification with reduced HTHS for engines without a DPF.
Viscosity at 100 °C is 9 mm²/s, near the upper end of the 6.9–9.3 mm²/s range for the summer grade 20. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: HTHS 3 mPa·s is among the best 10 % in the class (median 2.7); pour point −45 °C is in the top quarter of the class (median −42); flash point 232 °C is in the top quarter of the class (median 228).
Average values: Noack volatility 8 % is close to the class middle (median 8.4).
Weaker values: viscosity index 147 is among the weakest in the class (median 158).
Limit values: HTHS 3 mPa·s meets the 2.6 mPa·s minimum required for this class.
Based on its values it suits higher loads, towing or high-mileage engines. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state TBN and sulphated ash, so we cannot compare it on these parameters.