EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Red Line

Red Line 0W-40

Red Line 0W-40 is a 0W-40 engine oil (ACEA A3/B3, A3/B4 · API SN). According to the manufacturer's data sheet it has a viscosity of 86 mm²/s at 40 °C, 15.4 mm²/s at 100 °C, a viscosity index of 190, HTHS of 4 mPa·s and a pour point of −60 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-40 i
Viscosity 40 °C86 mm²/s75.45 mm²/s
Viscosity 100 °C15.4 mm²/s13.4 mm²/s
Viscosity index190 186.5
TBNnot stated
CCS −35 °C5700 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s).5970 mPa·s
Pour point−60 °C−49 °C
Flash pointnot stated
Densitynot stated
HTHS 150 °C4 mPa·s3.7 mPa·s
Sulphated ashnot statedNot stated by the manufacturer. ACEA A3/B3 allows at most 1.5 %.
Noack volatility9 %

All 0W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA A3/B3, A3/B4 · API SN
Oils by specification

Similar oils

Oils in the 0W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-40 class.

Red Line 0W-40 is a motor oil from Red Line, viscosity grade 0W-40. In the database we compare it with 7 other oils in the 0W-40 class.

The oil meets API SN, ACEA A3/B3, ACEA A3/B4, VW 502 00 and more (11 in total). API SN is an older American specification for petrol engines. ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s. MB 229.5 is the Mercedes-Benz approval for engines without a DPF with extended intervals.

Viscosity at 100 °C is 15.4 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 190 is in the top quarter of the class (median 186); HTHS 4 mPa·s is among the best 10 % in the class (median 3.7); pour point −60 °C is among the best 10 % in the class (median −50).

Limit values: HTHS 4 mPa·s meets the 3.5 mPa·s minimum required for this class.

Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state TBN and sulphated ash, so we cannot compare it on these parameters.