EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Schaeffer

Schaeffer Micron Moly Racing Oil 20W-50

Schaeffer Micron Moly Racing Oil 20W-50 is a 20W-50 engine oil (API SM). According to the manufacturer's data sheet it has a viscosity of 162.1 mm²/s at 40 °C, a viscosity index of 125, HTHS of 4.47 mPa·s, a TBN of 7.5 mg KOH/g, a pour point of −36 °C and sulphated ash of 0.9 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 20W-50 i
Viscosity 40 °C162.1 mm²/s159 mm²/s
Viscosity 100 °Cnot statedThe manufacturer gives viscosity partly only as a range, so it is missing from the table. Racing oil with high zinc and phosphorus.
Viscosity index125 140
TBN7.5 mg KOH/g8.15 mg KOH/g
CCS −15 °C3466 mPa·s5027 mPa·s
Pour point−36 °C−35 °C
Flash point230 °C224 °C
Densitynot stated
HTHS 150 °C4.47 mPa·s5.4 mPa·s
Sulphated ash0.9 %1 %
Noack volatility12.2 %

All 20W-50 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SM
Oils by specification

Similar oils

Oils in the 20W-50 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 20W-50 class.

Schaeffer Micron Moly Racing Oil 20W-50 is a motor oil from Schaeffer, viscosity grade 20W-50. In the database we compare it with 9 other oils in the 20W-50 class.

The oil meets API SM.

Strengths: CCS 3466 mPa·s is among the best 10 % in the class (median 4476).

Average values: pour point −36 °C is close to the class middle (median −36); flash point 230 °C is close to the class middle (median 227).

Weaker values: viscosity index 125 is in the weaker half of the class (median 140); HTHS 4.5 mPa·s is among the weakest in the class (median 5.4); TBN 7.5 mg KOH/g is among the weakest in the class (median 8.2).

Limit values: HTHS 4.5 mPa·s meets the 3.7 mPa·s minimum required for this class; CCS 3466 mPa·s at −15 °C is 36 % of the SAE limit (9500 mPa·s), giving a large cold-start reserve; sulphated ash of 0.9 % is higher; the oil is not intended for engines with a DPF.

Based on its values it suits engines without a DPF and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.