Schaeffer Supreme 7000 Synthetic Plus Racing Oil 20W-50
Schaeffer Supreme 7000 Synthetic Plus Racing Oil 20W-50 is a 20W-50 engine oil (API SM). According to the manufacturer's data sheet it has a viscosity index of 140, HTHS of 5.31 mPa·s, a TBN of 7.5 mg KOH/g and sulphated ash of 0.9 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 20W-50 i |
|---|---|---|
| Viscosity 40 °C | not stated | |
| Viscosity 100 °C | not statedThe manufacturer gives viscosity partly only as a range, so it is missing from the table. Racing oil with high zinc and phosphorus. | |
| Viscosity index | 140 | 140 |
| TBN | 7.5 mg KOH/g | 8.15 mg KOH/g |
| CCS −15 °C | 3506 mPa·s | 5027 mPa·s |
| Pour point | −42 °CThe manufacturer gives only a limit, "less than −42", not a measured value. | −35 °C |
| Flash point | 204.6 °C | 224 °C |
| Density | not stated | |
| HTHS 150 °C | 5.31 mPa·s | 5.4 mPa·s |
| Sulphated ash | 0.9 % | 1 % |
| Noack volatility | 7.5 % |
All 20W-50 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SM
- Oils by specification
Similar oils
Oils in the 20W-50 class with the closest parameters and the same specification.
- Schaeffer Micron Moly Racing Oil 20W-50API SM
- Royal Purple HPS 20W-50
- AMSOIL OE 20W-50API SN PLUS
- Red Line 20W-50ACEA A3/B3 · API SN
- PennGrade 1 High Performance 20W-50
- Valvoline Advanced Full Synthetic 20W-50ACEA A3/B3, A3/B4 · API SP
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 20W-50 class.
Schaeffer Supreme 7000 Synthetic Plus Racing Oil 20W-50 is a motor oil from Schaeffer, viscosity grade 20W-50. In the database we compare it with 9 other oils in the 20W-50 class.
The oil meets API SM.
Strengths: CCS 3506 mPa·s is in the top quarter of the class (median 4476).
Average values: viscosity index 140 is close to the class middle (median 140).
Weaker values: HTHS 5.3 mPa·s is in the weaker half of the class (median 5.4); TBN 7.5 mg KOH/g is among the weakest in the class (median 8.2); flash point 204.6 °C is among the weakest in the class (median 227).
Limit values: HTHS 5.3 mPa·s meets the 3.7 mPa·s minimum required for this class; CCS 3506 mPa·s at −15 °C is 37 % of the SAE limit (9500 mPa·s), giving a large cold-start reserve; sulphated ash of 0.9 % is higher; the oil is not intended for engines with a DPF.
Based on its values it suits engines without a DPF and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.