Valvoline Daily Protection 5W-30
Valvoline Daily Protection 5W-30 is a 5W-30 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 70 mm²/s at 40 °C, 11.3 mm²/s at 100 °C, a viscosity index of 154, HTHS of 3.3 mPa·s and a TBN of 6.6 mg KOH/g.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 70 mm²/s | 61.2 mm²/s |
| Viscosity 100 °C | 11.3 mm²/s | 10.7 mm²/s |
| Viscosity index | 154 | 166 |
| TBN | 6.6 mg KOH/g | 8.6 mg KOH/g |
| CCS −30 °C | 6200 mPa·sThe manufacturer gives only a limit, "less than 6200", not a measured value. | 4965 mPa·s |
| Pour point | −36 °CThe manufacturer gives only a limit, "at most −36", not a measured value. | −42 °C |
| Flash point | not stated | |
| Density | 0.857 g/cm³ | 0.851 g/cm³ |
| HTHS 150 °C | 3.3 mPa·s | 3.2 mPa·s |
| Sulphated ash | not stated |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- AMSOIL XL 5W-30ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
- AMSOIL OE 5W-30ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
- PennGrade 1 High Performance 5W-30
- Royal Purple HMX High Mileage 5W-30API SP
- Valvoline High Mileage MaxLife 5W-30API SP · ILSAC GF-6A
- Mighty Engine Guard dexos1 Gen3 5W-30API SP · ILSAC GF-6A
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
Valvoline Daily Protection 5W-30 is a motor oil from Valvoline, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.
The oil meets API SP, ILSAC GF-6A, Ford WSS-M2C961-A1, Chrysler MS-6395. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.
Viscosity at 100 °C is 11.3 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.
Average values: HTHS 3.3 mPa·s is close to the class middle (median 3.2).
Weaker values: viscosity index 154 is among the weakest in the class (median 166); TBN 6.6 mg KOH/g is among the weakest in the class (median 8.6).
Limit values: HTHS 3.3 mPa·s meets the 2.9 mPa·s minimum required for this class.
The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.