AMSOIL XL 10W-30
AMSOIL XL 10W-30 is a 10W-30 engine oil (ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 68.2 mm²/s at 40 °C, 10.9 mm²/s at 100 °C, a viscosity index of 150, HTHS of 3.3 mPa·s, a TBN of 10 mg KOH/g and a pour point of −44 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-30 i |
|---|---|---|
| Viscosity 40 °C | 68.2 mm²/s | 67.6 mm²/s |
| Viscosity 100 °C | 10.9 mm²/s | 10.9 mm²/s |
| Viscosity index | 150 | 148 |
| TBN | 10 mg KOH/g | 9.3 mg KOH/g |
| CCS −25 °C | 4740 mPa·s | 5000 mPa·s |
| Pour point | −44 °C | −39 °C |
| Flash point | 236 °C | 226 °C |
| Density | not stated | |
| HTHS 150 °C | 3.3 mPa·s | 3.4 mPa·s |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A5/B5 allows at most 1.6 %. | |
| Noack volatility | 4.8 % |
All 10W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
- Oils by specification
Similar oils
Oils in the 10W-30 class with the closest parameters and the same specification.
- AMSOIL OE 10W-30ACEA A1/B1, A5/B5 · API SN PLUS · ILSAC GF-5
- Royal Purple High Performance 10W-30API SQ · ILSAC GF-7A
- Valvoline Full Synthetic High Mileage MaxLife 10W-30API SP · ILSAC GF-6A
- Royal Purple Duralec Ultra 10W-30ACEA E7, E9 · API CK-4 · JASO DH-2
- Valvoline Advanced Full Synthetic 10W-30API SN · ILSAC GF-5
- PennGrade 1 High Performance 10W-30
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.
AMSOIL XL 10W-30 is a motor oil from Amsoil, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.
The oil meets API SP, ILSAC GF-6A, ACEA A1/B1, ACEA A5/B5 and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. ACEA A1/B1 is an older European specification for fuel-economy oils with reduced HTHS. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 10.9 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.
Strengths: flash point 236 °C is among the best 10 % in the class (median 227); Noack volatility 4.8 % is among the best 10 % in the class (median 8).
Average values: viscosity index 150 is close to the class middle (median 148); TBN 10 mg KOH/g is close to the class middle (median 9.3); CCS 4740 mPa·s is close to the class middle (median 4783); pour point −44 °C is close to the class middle (median −39).
Weaker values: HTHS 3.3 mPa·s is in the weaker half of the class (median 3.4).
Limit values: HTHS 3.3 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 4740 mPa·s at −25 °C is 68 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve.
Based on its values it suits harsh winters with easy starting. The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state sulphated ash, so we cannot compare it on this parameter.