EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Royal Purple

Royal Purple Duralec Ultra 10W-30

Royal Purple Duralec Ultra 10W-30 is a 10W-30 engine oil (ACEA E7, E9 · API CK-4 · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 71.5 mm²/s at 40 °C, 11.09 mm²/s at 100 °C, a viscosity index of 146, HTHS of 3.3 mPa·s, a TBN of 8.92 mg KOH/g, a pour point of −45 °C and sulphated ash of 1.2 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °C71.5 mm²/s67.6 mm²/s
Viscosity 100 °C11.09 mm²/s10.9 mm²/s
Viscosity index146 148
TBN8.92 mg KOH/g9.3 mg KOH/g
CCS −25 °C4826 mPa·s5000 mPa·s
Pour point−45 °C−39 °C
Flash point227 °C226 °C
Density0.876 g/cm³0.865 g/cm³
HTHS 150 °C3.3 mPa·s3.4 mPa·s
Sulphated ash1.2 %0.995 %

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7, E9 · API CK-4 · JASO DH-2
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

Royal Purple Duralec Ultra 10W-30 is a motor oil from Royal Purple, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.

The oil meets API CK-4, ACEA E7, ACEA E9, Cat ECF-3 and more (15 in total). API CK-4 is the current American specification for truck and pickup diesel engines. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 11.09 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.

Strengths: pour point −45 °C is in the top quarter of the class (median −39).

Average values: viscosity index 146 is close to the class middle (median 148); CCS 4826 mPa·s is close to the class middle (median 4783); flash point 227 °C is close to the class middle (median 227).

Weaker values: HTHS 3.3 mPa·s is in the weaker half of the class (median 3.4); TBN 8.9 mg KOH/g is in the weaker half of the class (median 9.3).

Limit values: HTHS 3.3 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 4826 mPa·s at −25 °C is 69 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve; sulphated ash of 1.2 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.