EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · THRIVE

THRIVE dexos1 Gen3 Full Synthetic 0W-20

THRIVE dexos1 Gen3 Full Synthetic 0W-20 is a 0W-20 engine oil (API SP · ILSAC GF-6A). According to the manufacturer's data sheet it has a viscosity of 42.6 mm²/s at 40 °C, 8.1 mm²/s at 100 °C, a viscosity index of 166, a TBN of 7.8 mg KOH/g and a pour point of −37 °C.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 0W-20 i
Viscosity 40 °C42.6 mm²/s44.145 mm²/s
Viscosity 100 °C8.1 mm²/s8.4 mm²/s
Viscosity index166 169
TBN7.8 mg KOH/g8 mg KOH/g
CCS −35 °C5720 mPa·s5670 mPa·s
Pour point−37 °C−42.5 °C
Flash point207 °C225 °C
Density0.845 g/cm³0.845 g/cm³
HTHS 150 °Cnot stated
Sulphated ashnot stated
Noack volatility10.5 %

All 0W-20 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API SP · ILSAC GF-6A
Oils by specification

Similar oils

Oils in the 0W-20 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 0W-20 class.

THRIVE dexos1 Gen3 Full Synthetic 0W-20 is a motor oil from THRIVE, viscosity grade 0W-20. In the database we compare it with 31 other oils in the 0W-20 class.

The oil meets API SP, ILSAC GF-6A, GM dexos1 Gen3, Chrysler MS-6395 and more (5 in total). API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). ILSAC GF-6A is the US–Japanese specification for fuel-efficient petrol engines with LSPI protection. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.

Viscosity at 100 °C is 8.1 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.

Strengths: Noack volatility 10.5 % is in the top quarter of the class (median 11.8).

Average values: CCS 5720 mPa·s is close to the class middle (median 5670).

Weaker values: viscosity index 166 is in the weaker half of the class (median 169); TBN 7.8 mg KOH/g is among the weakest in the class (median 8); pour point −37 °C is among the weakest in the class (median −44); flash point 207 °C is among the weakest in the class (median 227).

Limit values: CCS 5720 mPa·s at −35 °C is 92 % of the SAE limit (6200 mPa·s).

The data sheet does not state HTHS and sulphated ash, so we cannot compare it on these parameters.