Cat DEO 15W-40
Cat DEO 15W-40 is a 15W-40 engine oil (API CH-4). According to the manufacturer's data sheet it has a viscosity of 120.7 mm²/s at 40 °C, 15.5 mm²/s at 100 °C, a viscosity index of 134, a TBN of 12.2 mg KOH/g, a pour point of −33 °C and sulphated ash of 1.4 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 15W-40 i |
|---|---|---|
| Viscosity 40 °C | 120.7 mm²/s | 114.44 mm²/s |
| Viscosity 100 °C | 15.5 mm²/s | 15.2 mm²/s |
| Viscosity index | 134 | 138 |
| TBN | 12.2 mg KOH/g | 10.05 mg KOH/g |
| CCS −20 °C | not stated | |
| Pour point | −33 °C | −37 °C |
| Flash point | 218 °C | 230 °C |
| Density | not stated | |
| HTHS 150 °C | not stated | |
| Sulphated ash | 1.4 % | 1 % |
All 15W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API CH-4
- Oils by specification
Similar oils
Oils in the 15W-40 class with the closest parameters and the same specification.
- Kendall Super-D XA 15W-40ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Chevron Delo 400 LE 15W-40ACEA E7, E9 · API CJ-4, CI-4, SM · JASO DH-2
- Shell Rotella T3 Fleet 15W-40ACEA E9 · API CK-4, CJ-4, CI-4, SN · JASO DH-2
- Royal Purple Duralec Super 15W-40ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- CITGO Citgard 700 Synthetic Blend 15W-40API CK-4, CJ-4, CI-4, SN
- Shell Rotella T4 Triple Protection 15W-40ACEA E9 · API CK-4, CJ-4, CI-4 · JASO DH-2, MA, MA2
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.
Cat DEO 15W-40 is a motor oil from Caterpillar, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.
The oil meets API CH-4.
Viscosity at 100 °C is 15.5 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: TBN 12.2 mg KOH/g is among the best 10 % in the class (median 10.1).
Weaker values: viscosity index 134 is in the weaker half of the class (median 138); pour point −33 °C is among the weakest in the class (median −37); flash point 218 °C is among the weakest in the class (median 232).
Limit values: sulphated ash of 1.4 % is higher; the oil is not intended for engines with a DPF.
Based on its values it suits engines without a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.