Chevron Delo 400 LE 15W-40
Chevron Delo 400 LE 15W-40 is a 15W-40 engine oil (ACEA E7, E9 · API CJ-4, CI-4, SM · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 131 mm²/s at 40 °C, 15.7 mm²/s at 100 °C, a viscosity index of 126, a TBN of 9.3 mg KOH/g, a pour point of −33 °C and sulphated ash of 1 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 15W-40 i |
|---|---|---|
| Viscosity 40 °C | 131 mm²/s | 114.44 mm²/s |
| Viscosity 100 °C | 15.7 mm²/s | 15.2 mm²/s |
| Viscosity index | 126 | 138 |
| TBN | 9.3 mg KOH/g | 10.05 mg KOH/g |
| CCS −20 °C | 6400 mPa·s | 6200 mPa·s |
| Pour point | −33 °C | −37 °C |
| Flash point | 204 °CThe manufacturer gives only a limit, "more than 204", not a measured value. | 230 °C |
| Density | 0.881 g/cm³ | 0.875 g/cm³ |
| HTHS 150 °C | not statedNot stated by the manufacturer. ACEA E7 requires at least 3.5 mPa·s. | |
| Sulphated ash | 1 % | 1 % |
All 15W-40 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA E7, E9 · API CJ-4, CI-4, SM · JASO DH-2
- Oils by specification
Similar oils
Oils in the 15W-40 class with the closest parameters and the same specification.
- Royal Purple Duralec Super 15W-40ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Royal Purple Duralec Ultra 15W-40ACEA E7, E9 · API CK-4 · JASO DH-2
- John Deere Plus-50 II 15W-40ACEA E7, E9 · API CK-4, CJ-4, CI-4, SN
- Schaeffer 700 SynShield Durability Advantage 15W-40ACEA E7, E11 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Kendall Super-D 3 15W-40ACEA E7 · API CI-4, SL
- Valvoline Premium Blue One Solution Gen2 15W-40ACEA E7, E9 · API CK-4, CJ-4, CI-4, SP · JASO DH-2
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.
Chevron Delo 400 LE 15W-40 is a motor oil from Chevron, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.
The oil meets API CJ-4, API CI-4, API SM, ACEA E7 and more (17 in total). ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF.
Viscosity at 100 °C is 15.7 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.
Weaker values: viscosity index 126 is among the weakest in the class (median 138); TBN 9.3 mg KOH/g is among the weakest in the class (median 10.1); CCS 6400 mPa·s is among the weakest in the class (median 6050); pour point −33 °C is among the weakest in the class (median −37).
Limit values: CCS 6400 mPa·s at −20 °C is 91 % of the SAE limit (7000 mPa·s); sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.
Based on its values it suits truck and pickup diesel engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.