EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Royal Purple

Royal Purple Duralec Super 15W-40

Royal Purple Duralec Super 15W-40 is a 15W-40 engine oil (ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2). According to the manufacturer's data sheet it has a viscosity of 108 mm²/s at 40 °C, 15.2 mm²/s at 100 °C, a viscosity index of 146, a TBN of 10 mg KOH/g, a pour point of −45 °C and sulphated ash of 0.98 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 15W-40 i
Viscosity 40 °C108 mm²/s114.44 mm²/s
Viscosity 100 °C15.2 mm²/s15.2 mm²/s
Viscosity index146 138
TBN10 mg KOH/g10.05 mg KOH/g
CCS −20 °C4628 mPa·s6200 mPa·s
Pour point−45 °C−37 °C
Flash point234 °C230 °C
Densitynot stated
HTHS 150 °Cnot statedNot stated by the manufacturer. ACEA E7 requires at least 3.5 mPa·s.
Sulphated ash0.98 %1 %

All 15W-40 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
Oils by specification

Similar oils

Oils in the 15W-40 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 15W-40 class.

Royal Purple Duralec Super 15W-40 is a motor oil from Royal Purple, viscosity grade 15W-40. In the database we compare it with 20 other oils in the 15W-40 class.

The oil meets API CK-4, API CJ-4, API CI-4, ACEA E7 and more (16 in total). API CK-4 is the current American specification for truck and pickup diesel engines. ACEA E7 is the European specification for heavy-duty diesel engines without a DPF. ACEA E9 is the European specification for heavy-duty diesel engines with a DPF. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 15.2 mm²/s, near the upper end of the 12.5–16.3 mm²/s range for the summer grade 40. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: viscosity index 146 is in the top quarter of the class (median 138); CCS 4628 mPa·s is in the top quarter of the class (median 6050); pour point −45 °C is among the best 10 % in the class (median −37).

Average values: flash point 234 °C is close to the class middle (median 232).

Weaker values: TBN 10 mg KOH/g is in the weaker half of the class (median 10.1).

Limit values: CCS 4628 mPa·s at −20 °C is 66 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve; sulphated ash of 0.98 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF, higher loads, towing or high-mileage engines and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state HTHS and Noack volatility, so we cannot compare it on these parameters.