Valvoline Advanced Full Synthetic 5W-20
Valvoline Advanced Full Synthetic 5W-20 is a 5W-20 engine oil (API SN · ILSAC GF-5). According to the manufacturer's data sheet it has a viscosity of 46.5 mm²/s at 40 °C, 8.1 mm²/s at 100 °C, a viscosity index of 147, HTHS of 2.7 mPa·s, a TBN of 9.3 mg KOH/g and sulphated ash of 0.97 %.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-20 i |
|---|---|---|
| Viscosity 40 °C | 46.5 mm²/s | 47.75 mm²/s |
| Viscosity 100 °C | 8.1 mm²/s | 8.4 mm²/s |
| Viscosity index | 147 | 157.5 |
| TBN | 9.3 mg KOH/g | 9.1 mg KOH/g |
| CCS −30 °C | 6000 mPa·sThe manufacturer gives only a limit, "less than 6000", not a measured value. | 4397 mPa·s |
| Pour point | −36 °CThe manufacturer gives only a limit, "at most −36", not a measured value. | −42 °C |
| Flash point | not stated | |
| Density | not stated | |
| HTHS 150 °C | 2.7 mPa·s | 2.7 mPa·s |
| Sulphated ash | 0.97 % | 0.815 % |
| Noack volatility | 7.6 % |
All 5W-20 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SN · ILSAC GF-5
- Oils by specification
Similar oils
Oils in the 5W-20 class with the closest parameters and the same specification.
- Royal Purple High Performance 5W-20API SQ · ILSAC GF-7A
- Kendall GT-1 Full Synthetic 5W-20API SN · ILSAC GF-5
- Royal Purple HMX High Mileage 5W-20API SP
- Royal Purple HPS 5W-20
- AMSOIL OE 5W-20ACEA A1/B1 · API SN PLUS · ILSAC GF-5
- Kendall GT-1 Endurance 5W-20API SN · ILSAC GF-5
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-20 class.
Valvoline Advanced Full Synthetic 5W-20 is a motor oil from Valvoline, viscosity grade 5W-20. In the database we compare it with 22 other oils in the 5W-20 class.
The oil meets API SN, ILSAC GF-5, GM dexos1 Gen2, Ford WSS-M2C945-A and more (5 in total). API SN is an older American specification for petrol engines. ILSAC GF-5 is an older US–Japanese specification for fuel-efficient petrol engines. GM dexos1 is the General Motors licence for petrol engines. Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 8.1 mm²/s, in the middle of the 6.9–9.3 mm²/s range for the summer grade 20.
Strengths: Noack volatility 7.6 % is among the best 10 % in the class (median 8.4).
Average values: HTHS 2.7 mPa·s is close to the class middle (median 2.7); TBN 9.3 mg KOH/g is close to the class middle (median 9.1).
Weaker values: viscosity index 147 is among the weakest in the class (median 158).
Limit values: HTHS 2.7 mPa·s meets the 2.6 mPa·s minimum required for this class; sulphated ash of 0.97 % is higher; the oil is not intended for engines with a DPF.
Based on its values it suits engines without a DPF. The specification or approval in your vehicle manual always has the final word.