Royal Purple HMX High Mileage 10W-30
Royal Purple HMX High Mileage 10W-30 is a 10W-30 engine oil (API SP). According to the manufacturer's data sheet it has a viscosity of 71.8 mm²/s at 40 °C, 11.7 mm²/s at 100 °C, a viscosity index of 158, HTHS of 3.4 mPa·s, a TBN of 9.3 mg KOH/g and a pour point of −45 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-30 i |
|---|---|---|
| Viscosity 40 °C | 71.8 mm²/s | 67.6 mm²/s |
| Viscosity 100 °C | 11.7 mm²/s | 10.9 mm²/s |
| Viscosity index | 158 | 148 |
| TBN | 9.3 mg KOH/g | 9.3 mg KOH/g |
| CCS −25 °C | 3836 mPa·s | 5000 mPa·s |
| Pour point | −45 °C | −39 °C |
| Flash point | 224 °C | 226 °C |
| Density | not stated | |
| HTHS 150 °C | 3.4 mPa·s | 3.4 mPa·s |
| Sulphated ash | not stated |
All 10W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- API SP
- Oils by specification
Similar oils
Oils in the 10W-30 class with the closest parameters and the same specification.
- Red Line 10W-30ACEA A3/B3, A3/B4 · API SN
- Valvoline Premium Blue 8600 ES 10W-30ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- Mobil Delvac 1300 Super 10W-30API CK-4, CJ-4, CI-4, SP · JASO DH-2
- Mobil Delvac HDEO 10W-30
- Phillips 66 Guardol ECT 10W-30API CK-4, CJ-4, CI-4
- Royal Purple Duralec Ultra 10W-30ACEA E7, E9 · API CK-4 · JASO DH-2
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.
Royal Purple HMX High Mileage 10W-30 is a motor oil from Royal Purple, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.
The oil meets API SP, Chrysler MS-6395. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). Chrysler MS-6395 is the Stellantis approval for Jeep, Dodge, RAM and Chrysler petrol engines.
Viscosity at 100 °C is 11.7 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: viscosity index 158 is among the best 10 % in the class (median 148); CCS 3836 mPa·s is in the top quarter of the class (median 4783); pour point −45 °C is in the top quarter of the class (median −39).
Average values: HTHS 3.4 mPa·s is close to the class middle (median 3.4); TBN 9.3 mg KOH/g is close to the class middle (median 9.3).
Weaker values: flash point 224 °C is in the weaker half of the class (median 227).
Limit values: HTHS 3.4 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 3836 mPa·s at −25 °C is 55 % of the SAE limit (7000 mPa·s), giving a large cold-start reserve.
Based on its values it suits higher loads, towing or high-mileage engines and harsh winters with easy starting. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state Noack volatility and sulphated ash, so we cannot compare it on these parameters.