Red Line 10W-30
Red Line 10W-30 is a 10W-30 engine oil (ACEA A3/B3, A3/B4 · API SN). According to the manufacturer's data sheet it has a viscosity of 70 mm²/s at 40 °C, 11.4 mm²/s at 100 °C, a viscosity index of 155, HTHS of 3.5 mPa·s and a pour point of −45 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 10W-30 i |
|---|---|---|
| Viscosity 40 °C | 70 mm²/s | 67.6 mm²/s |
| Viscosity 100 °C | 11.4 mm²/s | 10.9 mm²/s |
| Viscosity index | 155 | 148 |
| TBN | not stated | |
| CCS −25 °C | 5000 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s). | 5000 mPa·s |
| Pour point | −45 °C | −39 °C |
| Flash point | 234 °C | 226 °C |
| Density | not stated | |
| HTHS 150 °C | 3.5 mPa·s | 3.4 mPa·s |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A3/B3 allows at most 1.5 %. | |
| Noack volatility | 6 % |
All 10W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A3/B3, A3/B4 · API SN
- Oils by specification
Similar oils
Oils in the 10W-30 class with the closest parameters and the same specification.
- Royal Purple HMX High Mileage 10W-30API SP
- Royal Purple Duralec Ultra 10W-30ACEA E7, E9 · API CK-4 · JASO DH-2
- Valvoline Premium Blue 8600 ES 10W-30ACEA E7, E9 · API CK-4, CJ-4, CI-4 · JASO DH-2
- PennGrade 1 High Performance 10W-30
- Mobil Delvac 1300 Super 10W-30API CK-4, CJ-4, CI-4, SP · JASO DH-2
- Mobil Delvac HDEO 10W-30
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.
Red Line 10W-30 is a motor oil from Red Line, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.
The oil meets API SN, ACEA A3/B3, ACEA A3/B4. API SN is an older American specification for petrol engines. ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s.
Viscosity at 100 °C is 11.4 mm²/s, in the middle of the 9.3–12.5 mm²/s range for the summer grade 30.
Strengths: viscosity index 155 is in the top quarter of the class (median 148); pour point −45 °C is in the top quarter of the class (median −39); flash point 234 °C is in the top quarter of the class (median 227).
Average values: HTHS 3.5 mPa·s is close to the class middle (median 3.4); Noack volatility 6 % is close to the class middle (median 8).
Limit values: HTHS 3.5 mPa·s meets the 2.9 mPa·s minimum required for this class.
The high flash point suggests low volatility and lower oil consumption. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state TBN and sulphated ash, so we cannot compare it on these parameters.