EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Phillips 66

Phillips 66 Guardol ECT 10W-30

Phillips 66 Guardol ECT 10W-30 is a 10W-30 engine oil (API CK-4, CJ-4, CI-4). According to the manufacturer's data sheet it has a viscosity of 80 mm²/s at 40 °C, 12 mm²/s at 100 °C, a viscosity index of 144, HTHS of 3.6 mPa·s, a TBN of 10.5 mg KOH/g, a pour point of −40 °C and sulphated ash of 1 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °C80 mm²/s67.6 mm²/s
Viscosity 100 °C12 mm²/s10.9 mm²/s
Viscosity index144 148
TBN10.5 mg KOH/g9.3 mg KOH/g
CCS −25 °C6300 mPa·s5000 mPa·s
Pour point−40 °C−39 °C
Flash point226 °C226 °C
Density0.87 g/cm³0.865 g/cm³
HTHS 150 °C3.6 mPa·s3.4 mPa·s
Sulphated ash1 %0.995 %

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API CK-4, CJ-4, CI-4
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

Phillips 66 Guardol ECT 10W-30 is a motor oil from Phillips 66, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.

The oil meets API CK-4, API CJ-4, API CI-4, Cummins CES 20086 and more (9 in total). API CK-4 is the current American specification for truck and pickup diesel engines. Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups.

Viscosity at 100 °C is 12 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: HTHS 3.6 mPa·s is in the top quarter of the class (median 3.4); TBN 10.5 mg KOH/g is in the top quarter of the class (median 9.3).

Average values: pour point −40 °C is close to the class middle (median −39); flash point 226 °C is close to the class middle (median 227).

Weaker values: viscosity index 144 is in the weaker half of the class (median 148); CCS 6300 mPa·s is among the weakest in the class (median 4783).

Limit values: HTHS 3.6 mPa·s meets the 2.9 mPa·s minimum required for this class; CCS 6300 mPa·s at −25 °C is 90 % of the SAE limit (7000 mPa·s); sulphated ash of 1 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.