EuropeUSA 904 oils in 35 classes + 187 American oils in 10 classes SK · EN · DE · PL · Contact
Engine oil technical data · Mobil

Mobil Delvac 1300 Super 10W-30

Mobil Delvac 1300 Super 10W-30 is a 10W-30 engine oil (API CK-4, CJ-4, CI-4, SP · JASO DH-2). According to the manufacturer's data sheet it has 12 mm²/s at 100 °C, HTHS of 3.6 mPa·s, a TBN of 9.6 mg KOH/g, a pour point of −33 °C and sulphated ash of 0.9 %.

Data sheet ↗ Data verified: 19 Nov 2026

✎ Found an error? Report it

Parameters from the data sheet

ParameterValueClass median 10W-30 i
Viscosity 40 °Cnot stated
Viscosity 100 °C12 mm²/s10.9 mm²/s
Viscosity indexnot stated
TBN9.6 mg KOH/g9.3 mg KOH/g
CCS −25 °Cnot stated
Pour point−33 °C−39 °C
Flash point218 °C226 °C
Density0.867 g/cm³0.865 g/cm³
HTHS 150 °C3.6 mPa·s3.4 mPa·s
Sulphated ash0.9 %0.995 %

All 10W-30 oils → See the class table for a detailed comparison with other oils.

Specifications and approvals

Specification
API CK-4, CJ-4, CI-4, SP · JASO DH-2
Oils by specification

Similar oils

Oils in the 10W-30 class with the closest parameters and the same specification.

Oil analysis

We wrote this text by comparing the data-sheet values with the other oils in the 10W-30 class.

Mobil Delvac 1300 Super 10W-30 is a motor oil from Mobil, viscosity grade 10W-30. In the database we compare it with 23 other oils in the 10W-30 class.

The oil meets API CK-4, API CJ-4, API CI-4, API SP and more (14 in total). API CK-4 is the current American specification for truck and pickup diesel engines. API SP is the American specification for petrol engines with protection against low-speed pre-ignition (LSPI). Cummins CES 20086 is the Cummins approval for diesel engines, including RAM pickups. Ford WSS-M2C… approvals apply to specific Ford engines, check them against the owner's manual.

Viscosity at 100 °C is 12 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.

Strengths: HTHS 3.6 mPa·s is in the top quarter of the class (median 3.4).

Average values: TBN 9.6 mg KOH/g is close to the class middle (median 9.3).

Weaker values: pour point −33 °C is among the weakest in the class (median −39); flash point 218 °C is among the weakest in the class (median 227).

Limit values: HTHS 3.6 mPa·s meets the 2.9 mPa·s minimum required for this class; sulphated ash of 0.9 % is within the heavy-duty diesel limit for DPF engines (up to 1 %), but it does not suit passenger cars with a DPF.

Based on its values it suits truck and pickup diesel engines with a DPF and higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.

The data sheet does not state Noack volatility, so we cannot compare it on this parameter.