Red Line High Performance 5W-30
Red Line High Performance 5W-30 is a 5W-30 engine oil (ACEA A3/B3, A3/B4 · API SN). According to the manufacturer's data sheet it has a viscosity of 71 mm²/s at 40 °C, 11.9 mm²/s at 100 °C, a viscosity index of 166, HTHS of 3.7 mPa·s and a pour point of −45 °C.
Data sheet ↗ Data verified: 19 Nov 2026
Parameters from the data sheet
| Parameter | Value | Class median 5W-30 i |
|---|---|---|
| Viscosity 40 °C | 71 mm²/s | 61.2 mm²/s |
| Viscosity 100 °C | 11.9 mm²/s | 10.7 mm²/s |
| Viscosity index | 166 | 166 |
| TBN | not stated | |
| CCS −30 °C | 6000 mPa·sThe manufacturer gives CCS in poise; converted to mPa·s (1 P = 100 mPa·s). | 4965 mPa·s |
| Pour point | −45 °C | −42 °C |
| Flash point | 232 °C | 230 °C |
| Density | not stated | |
| HTHS 150 °C | 3.7 mPa·s | 3.2 mPa·s |
| Sulphated ash | not statedNot stated by the manufacturer. ACEA A3/B3 allows at most 1.5 %. | |
| Noack volatility | 6 % |
All 5W-30 oils → See the class table for a detailed comparison with other oils.
Specifications and approvals
- Specification
- ACEA A3/B3, A3/B4 · API SN
- Oils by specification
Similar oils
Oils in the 5W-30 class with the closest parameters and the same specification.
- Castrol EDGE 5W-30 A3/B4 (US)ACEA A3/B3, A3/B4 · API SL
- Royal Purple HPS 5W-30
- Valvoline Daily Protection 5W-30API SP · ILSAC GF-6A
- AMSOIL XL 5W-30ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
- AMSOIL OE 5W-30ACEA A1/B1, A5/B5 · API SP · ILSAC GF-6A
- PennGrade 1 High Performance 5W-30
Oil analysis
We wrote this text by comparing the data-sheet values with the other oils in the 5W-30 class.
Red Line High Performance 5W-30 is a motor oil from Red Line, viscosity grade 5W-30. In the database we compare it with 44 other oils in the 5W-30 class.
The oil meets API SN, ACEA A3/B3, ACEA A3/B4. API SN is an older American specification for petrol engines. ACEA A3/B3 is for petrol and diesel engines without a DPF with extended drain intervals. ACEA A3/B4 is for high-performance petrol and diesel engines without a DPF, with HTHS of at least 3.5 mPa·s.
Viscosity at 100 °C is 11.9 mm²/s, near the upper end of the 9.3–12.5 mm²/s range for the summer grade 30. Within its class the oil is on the thick side, with more reserve at high temperatures.
Strengths: HTHS 3.7 mPa·s is among the best 10 % in the class (median 3.2); pour point −45 °C is in the top quarter of the class (median −42); Noack volatility 6 % is among the best 10 % in the class (median 9.4).
Average values: viscosity index 166 is close to the class middle (median 166); flash point 232 °C is close to the class middle (median 232).
Limit values: HTHS 3.7 mPa·s meets the 2.9 mPa·s minimum required for this class.
Based on its values it suits higher loads, towing or high-mileage engines. The specification or approval in your vehicle manual always has the final word.
The data sheet does not state TBN and sulphated ash, so we cannot compare it on these parameters.